AO Smith Z7 9 Litres Water Purifier

HOT WATER AT A PRESS OF BUTTON

Indias First RO with hot water option with added minerals at two temperature choices.

7S TECHNOLOGY: Pre-filter + Sediment filter + Pre Carbon filter + RO Membrane + MIN-TECH (Mineraliser Technology) + Silver Activated Post Carbon + SCMT (Silver Charged Membrane Technology). In A. O. Smith Z7 100% of the water passes through the RO membrane and Double Purified by SCMT.

ADVANCE UNIQUE PATENTED SSM TECHNOLOGY (SIDE STREAM RO MEMBRANE)

Suitable for water with low and high (upto 2000 ppm) TDS. Wastes less water and improves pure water recovery.

Double purification system which ensures absolute purity of water.

MIN-TECH (MINERALISER TECHNOLOGY)

Balances the pH of the water & adds essential minerals back to pure water.

Glow effect guides you to your water purifier at night and makes your kitchen look good.

TWIN ADVANCE ALERT TECHNOLOGY

For Sediment + Pre Carbon and RO membrane + other filters change.

For effective removal of suspended solids and sediment from water and to ensure better life of RO membrane.

CONVENIENCE

Pure water storage capacity of 10 litres. Provision for both wall mounting & table top.

Digital display for simple and intelligent display of information.

Hot water at a press of a button

Hot water at a press of a button

Purification technology

RO (Reverse Osmosis) + Silver Charged Membrane Technology

7 Stage Purifying Technology

Pre-filter + Sediment filter + Pre Carbon filter + Side Stream RO + MIN-TECH + Silver Activated Post Carbon and SCMT filter

Dispensing Mode

Electronic

Membrane type

Thin film composite RO membrane

Material of construction for plastic parts

Food grade, non toxic platic, engineering grade plastics

Pump type

Diaphragm pump, 24VDC, 0.26 Amps, Operating Pressure 125 psi (Max.)

Input voltage

150 – 300 VAC, 50 Hz

Power rating (Max.)

60 Watts

Pressure Rating***

7 psi to 30 psi

% Recovery**

Up to 30%

TDS reduction**

≥95% (approx.)

Heating element wattage

500 Watts @ 230 VAC

Warm water temperature

45°C ± 5°C

Hot water temperature

80°C ± 5°C

Input water temperature

5°C to 45°C

Product Dimensions (H x D x W)

480 mm x 368 mm x 322 mm

Net weight

10.8 kgs (approx.)

Gross weight

14.2 kgs (approx.)

Flow rate*

Up to 15 litres per hour

Storage tank capacity

9.2 litres (approx.)

Storage tank capacity (Hot tank)

0.8 litres (approx.)

*Flow rate depends on variable factors such as feed water pressure, feed water characteristics and condition of the Membranes and filters.

**Recovery and TDS reduction percentages also depend on variable factors such as life and condition of the Membranes and filters, feed water pressure, feed water characteristics.

***If input pressure exceeds 30 psi, a pressure reducing valve needs to be installed at the feed line. If the pressure is lower than 7 psi, a booster pump needs to be installed.