In A.O.Smith Z7+Hot RO Water Purifier, 100% ofthe water passes through patented side stream RO membrane and is further purified by Silver Charged Membrane Technology (SCMT). With A.O. Smith RO+SCMT technology harmful substances are removed and essential minerals are added back into the healthy water. A.O.Smith Z7+Hot is equipped with electronic faucet for dispensing water instantly at press of a button with choice of 45ºC and 80ºC temperature settings.This water purifer is designed to suit your lifestyle and match your kitchen décor.
Indias First RO with hot water option with added minerals at two temperature choices.
PURITY THROUGH 7 STAGE PURIFICATION
7S TECHNOLOGY: Pre-filter + Sediment filter + Pre Carbon filter + RO Membrane + MIN-TECH (Mineraliser Technology) + Silver Activated Post Carbon + SCMT (Silver Charged Membrane Technology). In A. O. Smith Z7 100% of the water passes through the RO membrane and Double Purified by SCMT.
Suitable for water with low and high (upto 2000 ppm) TDS. Wastes less water and improves pure water recovery.
RO + SCMT (SILVER CHARGED MEMBRANE TECHNOLOGY)
Double purification system which ensures absolute purity of water.
Balances the pH of the water & adds essential minerals back to pure water.
INDIA'S FIRST RO WITH NIGHT ASSIST
Glow effect guides you to your water purifier at night and makes your kitchen look good.
For Sediment + Pre Carbon and RO membrane + other filters change.
ADVANCED PRE-FILTER & SEDIMENT FILTER
For effective removal of suspended solids and sediment from water and to ensure better life of RO membrane.
Pure water storage capacity of 10 litres. Provision for both wall mounting & table top.
Digital display for simple and intelligent display of information.
Hot water at a press of a button
A. O. Smith Z7
RO (Reverse Osmosis) + Silver Charged Membrane Technology
7 Stage Purifying Technology
Pre-filter + Sediment filter + Pre Carbon filter + Side Stream RO + MIN-TECH + Silver Activated Post Carbon and SCMT filter
Thin film composite RO membrane
Material of construction for plastic parts
Food grade, non toxic platic, engineering grade plastics
Diaphragm pump, 24VDC, 0.26 Amps, Operating Pressure 125 psi (Max.)
150 – 300 VAC, 50 Hz
Power rating (Max.)
7 psi to 30 psi
Up to 30%
Heating element wattage
500 Watts @ 230 VAC
Warm water temperature
45°C ± 5°C
Hot water temperature
80°C ± 5°C
Input water temperature
5°C to 45°C
Product Dimensions (H x D x W)
480 mm x 368 mm x 322 mm
10.8 kgs (approx.)
14.2 kgs (approx.)
Up to 15 litres per hour
Storage tank capacity
9.2 litres (approx.)
Storage tank capacity (Hot tank)
0.8 litres (approx.)
*Flow rate depends on variable factors such as feed water pressure, feed water characteristics and condition of the Membranes and filters.
**Recovery and TDS reduction percentages also depend on variable factors such as life and condition of the Membranes and filters, feed water pressure, feed water characteristics.
***If input pressure exceeds 30 psi, a pressure reducing valve needs to be installed at the feed line. If the pressure is lower than 7 psi, a booster pump needs to be installed.